Tel: +8615866565976
E-mail: james@lianfaplastic.com

Contact

Address: Beizhan Industrial Park, Qiaoguan Town, Changle County, Shandng P.R., China
Contact: Pandy Wang
TEL: 0086-536-6631789
Fax: 0086-536-6633456
Phone: +8615866565976
E-mail: sales2@lianfaplastic.com

PP Plastic Sheet with Many Colors

Basic Info
  • Model NO.: PP-2

  • Kind: Engineering Plastic Sheet

  • Contraction Percentage: <0.4%

  • Thickness: 1-100mm

  • FOB Port: Shenzhen

  • Small Order: Accepted

  • Transport Package: by Plastic Pallet or Wooden Pallet

  • Origin: China

  • Material: PP

  • Water Absorption: <0.01%

  • Tensile Strength: (30~40)MPa

  • Size: 1000*2000mm

  • Sample Availability: Yes

  • Trademark: PRIOR

  • Specification: SGS, RoHS

  • HS Code: 3920209090

Product Description
PP Plastic Sheet with Many Colors

Description

PP is a non-toxic,non smell ,low density material .It has better strength ,rigidity and heat resistance than PE.Its operating temperature is about 100ºC.It has outstanding electrical properties and high frequency insulating properties.As a result ,it is suitable to make the general industrial parts ,chemical resistant parts and insulation parts .

Characteristics
-Good tensile strength
-Good fatigue resistance
-Nice chemical resistance
-Good electrical properties
-Good insulation 
-Low density
-Environmental protective
-Food safe
-Can boil in high temperature

PP Applications
1.Chemical resistant parts
2.Insulation parts
3.Home appliances shell, wire and cable
4.Floor of swimming pool



Technical Data Sheet
PROPERTIESTest MethodUnitValue
I.Physical Properties
DensityISO 1183g/cm30.91
Water absorption 24hrsISO 62%0.01
II.Thermal Properties
Heat deflection temperature - HDT/AISO 75AºC65
Min. service temperature ºC-30
Max. service temperature ºC100
Thermal conductivity at 23 ºCDIN 11359W/(K*m)0.22
Coefficient of linear thermal expansionISO 1135910-4*K-11.7
Flammability Rating(6mm thickness)UL 94-HB
III.Mechanical Properties at 23ºC
Tensile strength at yieldISO 527-2MPa30
Tensile strength at breakISO 527-2Mpa-
Elongation at breakISO 527-2%50
Modulus of elasticity after tensile testISO 527-2MPa1,600
Modulus of elasticity after flexural testISO 178MPa-
Hardness - Shore DDIN 53505 70
Charpy impact strengthISO 179kJ/m2N. B.
Friction coefficientDIN 53375 0.3
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHzIEC 60250106Hz2.3
Dielectric loss factor at 1 MHzIEC 60250106Hz0.0002
Volume resistivelyIEC 60093Ohm (Ω) * cm>1016
Surface resisivelyIEC 60093Ohm (Ω)>1013
Dielectric strengthIEC 60243-1kV/mm40
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
    
Statement:   
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.